On Mon, 17 Aug 2009, Philip Lord wrote: > Humm...just looking at the schematic again, maybe I made a mistake in my > selection of Tant capacitors. > > The schematic says 1.0 25v so I purchases a 25v 1.0uf capacitor, but looking > at the part I removed through a magnifying glass, it says 1k 35v. I'm > guessing that 1k=10uf. If so, in that case I bought and installed the wrong > parts. Capacitors are usually measured in pf - 1,000,000 pf to 1 uf. You had a problem that was blowing fuses. Fixing the power supply does not necessarily fix that problem. The question is: what are the voltages on J8? What are the voltages on the output of the four voltage regulators? wlevak@sdf.lonestar.org SDF Public Access UNIX System - http://sdf.lonestar.org Message was sent through the cbm-hackers mailing listReceived on 2009-08-20 05:00:05
Archive generated by hypermail 2.2.0.