> > But it's better to always operate an IEC bus with all devices powered on > > and counting each attached device as a load (even if the device isn't > > talking). Don't try more than 4 drives + 1 printer as a max load on a > > single bus, and if using more than 2 devices, try to keep the cable > > length as short as possible. > > And some fast loaders will not function with any other devices on the bus > except a single disk drive, correct? Quite a few in fact, especially those that (ab)use additional bus lines. -- ------------------------------------ personal: http://www.cameronkaiser.com/ -- Cameron Kaiser * Floodgap Systems * www.floodgap.com * ckaiser@floodgap.com -- The only thing to fear is fearlessness -- R. E. M. ------------------------- Message was sent through the cbm-hackers mailing listReceived on 2010-11-30 23:00:04
Archive generated by hypermail 2.2.0.