I found on my NTSC P500 that the composite signal was actually better than the S-Video output. It leads me to believe there may be some design flaw of the video circuitry. Of course it could also be the same reason the C64 has trouble on some LCD monitors. Some have found that a resistor is needed to lower the output signal. Have you tried a real commodore monitor? Steve >________________________________ >From: Michał Pleban <lists@michau.name> >To: cbm-hackers@musoftware.de >Sent: Saturday, November 12, 2011 4:18:28 AM >Subject: Blurry picture > >Hello! > >Yesterday I managed to fix my P500 :-) It works well, but exhibits a >strange problem: the picture is very blurry, and sometimes wavy. It is >not a problem of the television set, because the picture from the 610 >was sharp and clear on the same TV. I am not an analog guy, so I have no >idea how to improve this. Is it inadequate shielding of the VIC area >(the upper shielding is lost)? Or simply the P500 being an early model, >so the electronics is bad? I tried regulating the two potentiometers >near the VIC, but it had no effect. > >Regards, >Michau. > > Message was sent through the cbm-hackers mailing list > > > Message was sent through the cbm-hackers mailing listReceived on 2011-11-12 14:00:19
Archive generated by hypermail 2.2.0.