Hi, I expected 1v peak-to peak and found 0.3/0.35v with the volume at the maximum I dont know it my plus4 is failing and the ouput should be 1v or if it's normal to have 0.3v. best regards, -- didier Le 15/03/2012 09:00, "Imre Széll" <iszell75@gmail.com>" a écrit : > TED has volume levels 0-8. > > 2012. március 15. 8:05 Anders Carlsson írta, <anders.carlsson@sfks.se > <mailto:anders.carlsson@sfks.se>>: > > Marko Mäkelä wrote: > > roughly a square signal, between -0.3v and +0.3v > > I seem to remember that the 'standard' for line-level audio is > 1 volt peak-to-peak. > > > Besides, doesn't TED have 1+15 levels of volume like VIC-I and SID > do? It was too long ago that I was playing with TED sound to > clearly remember, but if a volume of 6 equals 40% of maximum, you > would in dry theory expect -0.4V. Didier could look up if the VOL > command can take higher values for stronger volume and measure the > output. > > Best regards > > -- > Anders Carlsson > > > > Message was sent through the cbm-hackers mailing list > > Message was sent through the cbm-hackers mailing listReceived on 2012-03-15 10:00:05
Archive generated by hypermail 2.2.0.