Rob Clarke wrote: > As far as I can measure, the usual European (and maybe elsewhere) VIC-20 2 > pin connector has dimensions of 17mm x 11mm with a pin spacing of 10 mm > and a pin diameter of about 2.5mm, with a 2mm divider down the centre of > the plug. The connector on my 1001 is approx 16mm x 9mm with a pin spacing > of 7mm, diameter 1.5mm with no divider. I can't vouch for the VIC-1001, but I do know that the two-prong VIC-20 came with two different two-prongs. The larger one with wider pins is the more common one, but there exists another one with smaller pins. Quite possibly this is a heritage from the VIC-1001 model. I don't know if the other kind would be related to the Microgamma or Eurostile keyboards, actually I think they'd be randomly assigned at the start. Good luck! Anders Carlsson Message was sent through the cbm-hackers mailing listReceived on 2012-08-26 23:00:27
Archive generated by hypermail 2.2.0.