Hallo Dave, > But what happens when you apply power? Will FF1 or FF2 be set? Does that matter? The first (hundreds of) micro seconds will be reset time anyway. And both FF1 and FF2 will be (re)set during the first CLKs. > to see what options you have available for the OLMC flip-flop Little knowledge is sometimes worse then no knowledge at all. But I understand that the output of this OLMC FF is updated by the signal on the CLK input. If this is, thinking in 6502 terms, PHI0, I have a problem: that is certainly not accurate enough. I could add an extra oscilator with a higher frequency but that doesn't seem appropiate IMHO. Unless you can proof me wrong by giving a design that does the same as the 7 NAND gates one, I'll stick to my, or better, Martin's design. -- Kind regards / Met vriendelijke groet, Ruud Baltissen www.Baltissen.org Message was sent through the cbm-hackers mailing listReceived on 2013-04-19 23:00:03
Archive generated by hypermail 2.2.0.