Hallo Groepaz, > imho having it in some format that can be assembled into an actual binary is a must > these days - as that is the only (sane) way to make sure it doesnt contain errors. I have the a "working" V3 version. Having this as base it shouldn't be to difficult to create the V1 and V2 Kernals as well. And at this moment I'm busy creating the JiffyDOS V6.01 version using this V3 version as base. I have the approval of Magnus Nyman for using his disassembly of JD. At this moment these sources will only assemble with my own assembler but IMHO it shouldn't be that difficult to convert them into other formats. Being a programmer and knowing my own format, I should be able to create a program that does the conversion. The only, small, problem: I'm not so familiar with other formats. Hallo allemaal, > In addition to what I wrote before, have a look at the quality of work there: > > ;************************************************************************** > ;************************************************************************** > ; > ; first a whole load of equates > > LAB_00 = $00 ; 6510 I/O port data direction register > ... > LAB_01 = $01 ; 6510 I/O port data register > ... > LAB_03 = $03 ; float to fixed vector low byte > LAB_04 = $04 ; float to fixed vector high byte I took the liberty to change the labels by renaming them to the ones Commodore used: .eq D6510 = $00 ; 6510 I/O port data direction register .eq P6510 = $01 ; 6510 I/O port data register .eq ADRAY1 = $03 ; float to fixed vector And I turned using separate high bytes like LAB_04 as example, I used " ADRAY1+1". With kind regards / met vriendelijke groet, Ruud Baltissen www.Baltissen.org De informatie in dit e-mailbericht is vertrouwelijk en uitsluitend bestemd voor de geadresseerde. Wanneer u dit bericht per abuis ontvangt, verzoeken wij u contact op te nemen met de afzender per kerende e-mail. Verder verzoeken wij u in dat geval dit e-mailbericht te vernietigen en de inhoud ervan aan niemand openbaar te maken. Wij aanvaarden geen aansprakelijkheid voor onjuiste, onvolledige dan wel ontijdige overbrenging van de inhoud van een verzonden e-mailbericht, noch voor daarbij overgebrachte virussen. APG Rechtenbeheer N.V. is gevestigd te Heerlen en is ingeschreven in het handelsregister van de Kamer van Koophandel Limburg onder nummer 14099617 The information contained in this e-mail is confidential and may be privileged. It may be read, copied and used only by the intended recipient. If you have received it in error, please contact the sender immediately by return e-mail; please delete in this case the e-mail and do not disclose its contents to any person. We don't accept liability for any errors, omissions, delays of receipt or viruses in the contents of this message which arise as a result of e-mail transmission. APG Rechtenbeheer N.V. is registered in the trade register of the Chamber of Commerce Limburg, The Netherlands, registration number: 14099617 Message was sent through the cbm-hackers mailing listReceived on 2014-11-12 07:00:03
Archive generated by hypermail 2.2.0.