i found this one: http://myoldcomputer.nl/technical-info/mainboards/commodore-64/board-326298-01-c64/ http://myoldcomputer.nl/wp-content/uploads/2015/11/board-326298.jpg resistor pack 4 (RP4) Seems to be just below the expansion slot. is it like i count a 10 pin one? are there any of the holes that do not connect to anything? why i ask is that i count 10 pins so there are 9 resistors inside, but i only count 8 resistors on the schematic 2017-02-17 19:24 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>: > the link for 326298 did not load > > 2017-02-17 18:12 GMT+01:00 Francesco Messineo < > francesco.messineo@gmail.com>: > >> >>> >> >>> >> >>> As far as I know, the 326298 is older than the KU-14194HB. >> >> >> >> >> >> yes, but should be practically identical, not that I witnessed them in >> >> real life, but I've never found any documented schematic change >> >> between them. >> > >> > >> > The layout is quite different, especially on the right side of the PCB: >> > >> > KU: http://myoldcomputer.nl/wp-content/uploads/2015/11/KU-14194HB.jpg >> > >> > 326298: http://www.cbmhardware.de/c64/images/326298a.jpg >> > >> >> you're so right! >> I'm missing three revisions then (and both the two older ones won't be >> coming as far as I can dream). >> >> Frank >> >> Message was sent through the cbm-hackers mailing list >> > > Message was sent through the cbm-hackers mailing listReceived on 2017-02-17 19:02:34
Archive generated by hypermail 2.2.0.
