@Ruud Found some errors in your schematic U31 pin 16 is missing C68 is missing 2017-02-17 21:37 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>: > @Silver no problemo... its no rush. I'm still getting my head to absorb > the schematic from the Programmer's Reference Guide and schematic #326106. > There are a few differences allready between the 2 and so far i have just > put a circle arround them > > But so far RP4 and L4 is the mystery bits. L4 is just listed as a line > filter with no values at all or any mfg code. all i know is that its 2 > inductors in one unit > > RP4 is a resistor pack with one common pin, but given its listed as a 10 > pin device there are 9 resistors inside, but i can only count 8 on the > schematic so i guess 1 is unused. > > 2017-02-17 21:23 GMT+01:00 <silverdr@wfmh.org.pl>: > >> >> > On 2017-02-17, at 20:55, Bo Herrmannsen <bo.herrmannsen@gmail.com> >> wrote: >> > >> > @Silver >> > >> > When you come by the 326298 please let me know. >> >> As I wrote, I should have one somewhere. The keyword here is "somewhere". >> So I might have a quick look but if it's not easily found then I won't be >> able to dedicate enough time to dig it out. And - obviously - it won't be >> for sale but I might check a thing or two for you if needed. >> >> BTW. Some time ago I had a short discussion about VIC-20 boards here. I >> don't remember know exactly with whom but if the person who wanted me to >> check things on those boards reads the list - please come back with your >> question again. Seems that I managed to gather /I think/ all my VIC-20s >> under one roof so I can check whatever you wanted to check there. >> >> -- >> SD! >> >> >> Message was sent through the cbm-hackers mailing list >> > > Message was sent through the cbm-hackers mailing listReceived on 2017-02-17 22:00:07
Archive generated by hypermail 2.2.0.