no rush i think i can see L4 on this pic: http://vintagecomputer.ca/wp-content/uploads/2017/02/C64-326298-Rev-A-front.jpg upper right corner just nex to the screw... the "coil" thingy might cover the text. 2017-02-18 0:26 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>: > I don't see pin 1 connected but I'll have to take the board out and check > both. I'll do that tomorrow with better light for pics. > > Took a couple of quick pics of the boards at the same link. > > http://vintagecomputer.ca/commodore-64-pics-326298-motherboards/ > > > > On Fri, Feb 17, 2017 at 6:17 PM, Bo Herrmannsen <bo.herrmannsen@gmail.com> > wrote: > >> thanks... off to bed >> >> but can you says if any of the pins from rp4 is not connecting to >> anything? >> >> hmmm.... L4... there are a dashed line around it on the schematic, maybe >> that means not mounted or something... >> >> 2017-02-18 0:09 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>: >> >>> Pics of L5 and RP4 on both boards. Sorry, glare is present because of >>> lighting. >>> >>> http://vintagecomputer.ca/commodore-64-pics-326298-motherboards/ >>> >>> >>> >>> On Fri, Feb 17, 2017 at 5:52 PM, Bo Herrmannsen < >>> bo.herrmannsen@gmail.com> wrote: >>> >>>> L5 i see also on the pic... between the switch and power input right? >>>> >>>> 2017-02-17 23:37 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>: >>>> >>>>> I only see an L5. Can't see any other L's actually. That goes for >>>>> both. >>>>> >>>>> On Fri, Feb 17, 2017 at 5:34 PM, Bo Herrmannsen < >>>>> bo.herrmannsen@gmail.com> wrote: >>>>> >>>>>> L4 is proberly located in the very corner next to the slot and power >>>>>> in >>>>>> >>>>>> on some boards the are below the slot >>>>>> >>>>>> but on revC i just figured that we just have 2 equal inductors on the >>>>>> came core... red and green wire on the link i posted >>>>>> >>>>>> 2017-02-17 23:31 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>: >>>>>> >>>>>>> A camera actually works better than a scanner. I can take some pics >>>>>>> tomorrow with better daylight. >>>>>>> >>>>>>> Yes, that's where I read Rev A vs Rev C :) >>>>>>> >>>>>>> I can find RP4 (resistor pack bear the cartridge slot. Where is L4? >>>>>>> >>>>>>> On Fri, Feb 17, 2017 at 5:23 PM, Bo Herrmannsen < >>>>>>> bo.herrmannsen@gmail.com> wrote: >>>>>>> >>>>>>>> nope that does not make sense either >>>>>>>> >>>>>>>> so you are not the only one that dont get date vs rev >>>>>>>> >>>>>>>> in the link i posted i can see rev C very faint at the bottom edge >>>>>>>> in the middle >>>>>>>> >>>>>>>> just under the component FB10 and next to C93 >>>>>>>> >>>>>>>> 2017-02-17 23:20 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com >>>>>>>> >: >>>>>>>> >>>>>>>>> I'm not sure where to look. Chip dates are: >>>>>>>>> >>>>>>>>> - 326298 Rev A - 6502 date: Week 48 82 >>>>>>>>> - 326298 Rev C - 6502 date: Week 29 82 >>>>>>>>> >>>>>>>>> I still don't get Commodore dates vs revisions. >>>>>>>>> >>>>>>>>> On Fri, Feb 17, 2017 at 5:17 PM, Bo Herrmannsen < >>>>>>>>> bo.herrmannsen@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Can you see any production dates on the Rev A and Rev C ? >>>>>>>>>> >>>>>>>>>> 2017-02-17 23:14 GMT+01:00 Santo Nucifora < >>>>>>>>>> santo.nucifora@gmail.com>: >>>>>>>>>> >>>>>>>>>>> Slight change to my last message. I have two boards plus a >>>>>>>>>>> couple of extra C64 Silver labels that I don't know what's inside at this >>>>>>>>>>> point. >>>>>>>>>>> >>>>>>>>>>> The open ones have: >>>>>>>>>>> - 326298 Rev A >>>>>>>>>>> - 326298 Rev C >>>>>>>>>>> >>>>>>>>>>> That picture is a Rev C. >>>>>>>>>>> >>>>>>>>>>> On Fri, Feb 17, 2017 at 5:13 PM, Bo Herrmannsen < >>>>>>>>>>> bo.herrmannsen@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> would it be pushing it using a scanner for that? >>>>>>>>>>>> >>>>>>>>>>>> benefits are able to get better image... >>>>>>>>>>>> >>>>>>>>>>>> does the board look the same as this: http://myoldcomputer.nl/ >>>>>>>>>>>> wp-content/uploads/2015/11/board-326298.jpg >>>>>>>>>>>> >>>>>>>>>>>> but i need details arround RP4 and L4 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2017-02-17 23:07 GMT+01:00 Santo Nucifora < >>>>>>>>>>>> santo.nucifora@gmail.com>: >>>>>>>>>>>> >>>>>>>>>>>>> I have a C64 326298 board in front of me. It's not for sale >>>>>>>>>>>>> but I'm happy to take detailed pics if you need them. >>>>>>>>>>>>> >>>>>>>>>>>>> On Fri, Feb 17, 2017 at 4:47 PM, Bo Herrmannsen < >>>>>>>>>>>>> bo.herrmannsen@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> also C48 and C93 is missing >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2017-02-17 22:24 GMT+01:00 Bo Herrmannsen < >>>>>>>>>>>>>> bo.herrmannsen@gmail.com>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> @Ruud >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Found some errors in your schematic >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> U31 pin 16 is missing >>>>>>>>>>>>>>> C68 is missing >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2017-02-17 21:37 GMT+01:00 Bo Herrmannsen < >>>>>>>>>>>>>>> bo.herrmannsen@gmail.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> @Silver no problemo... its no rush. I'm still getting my >>>>>>>>>>>>>>>> head to absorb the schematic from the Programmer's Reference Guide and >>>>>>>>>>>>>>>> schematic #326106. There are a few differences allready between the 2 and >>>>>>>>>>>>>>>> so far i have just put a circle arround them >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> But so far RP4 and L4 is the mystery bits. L4 is just >>>>>>>>>>>>>>>> listed as a line filter with no values at all or any mfg code. all i know >>>>>>>>>>>>>>>> is that its 2 inductors in one unit >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> RP4 is a resistor pack with one common pin, but given its >>>>>>>>>>>>>>>> listed as a 10 pin device there are 9 resistors inside, but i can only >>>>>>>>>>>>>>>> count 8 on the schematic so i guess 1 is unused. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2017-02-17 21:23 GMT+01:00 <silverdr@wfmh.org.pl>: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> > On 2017-02-17, at 20:55, Bo Herrmannsen < >>>>>>>>>>>>>>>>> bo.herrmannsen@gmail.com> wrote: >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > @Silver >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > When you come by the 326298 please let me know. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> As I wrote, I should have one somewhere. The keyword here >>>>>>>>>>>>>>>>> is "somewhere". So I might have a quick look but if it's not easily found >>>>>>>>>>>>>>>>> then I won't be able to dedicate enough time to dig it out. And - obviously >>>>>>>>>>>>>>>>> - it won't be for sale but I might check a thing or two for you if needed. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> BTW. Some time ago I had a short discussion about VIC-20 >>>>>>>>>>>>>>>>> boards here. I don't remember know exactly with whom but if the person who >>>>>>>>>>>>>>>>> wanted me to check things on those boards reads the list - please come back >>>>>>>>>>>>>>>>> with your question again. Seems that I managed to gather /I think/ all my >>>>>>>>>>>>>>>>> VIC-20s under one roof so I can check whatever you wanted to check there. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> SD! >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Message was sent through the cbm-hackers mailing >>>>>>>>>>>>>>>>> list >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > Message was sent through the cbm-hackers mailing listReceived on 2017-02-18 08:00:02
Archive generated by hypermail 2.2.0.
