> On 2017-02-19, at 22:45, HÁRSFALVI Levente <publicmailbox@harsfalvi.net> wrote: > >>> There is clearly a visible difference between an R3 and an R5 on a 250466 board. (I've been using an R3 after having killed the original R5 of the machine / before I could obtain another one.) >> >> Could you elaborate/describe the difference? It's been some time since I tried those (and it was not in the '466 either) but I didn't notice anything striking. The R1 with its luma levels makes a noticeable difference but the later ones? > > Less contrast, more blurry / noisy / subjectively darker startup screen. Nothing as obvious as the 6569R1 with its fewer luminance levels, but still something clearly noticeable. Uhm in that case.. shall have to check again and try to do some semi-scientific measurements. > (Worst of all, with the R3 installed the machine started to exhibit VSP crash symptoms, which it never did previously. But that - again - doesn't have much to do with the parameters of the picture it generates. -- SD! Message was sent through the cbm-hackers mailing listReceived on 2017-02-19 23:00:02
Archive generated by hypermail 2.2.0.