Re: MS-DOS 3.30 boot on the CBM-II

From: Michał Pleban <*lists_at_michau.name*> Date: Sat, 04 Nov 2017 20:59:41 +0100 Message-ID: <59FE1C2D.6060106@michau.name> · lists_at_michau.name

Hello!

william degnan wrote:

> I am happy to help test.  I have DOS 1.25 and can boot into it with my
> CBM II, but I'd need an 8050 image of anything else that's needed.  I
> prefer if possible to start with an image of a working 3.3 disk so I can
> start at the testing the software part not the figuring out how to get
> it ruuning all weekend :-)

If you look at the README file, the first chapter is titled "Quick
start" and it tells step by step what to do :-) Basically you just
create two disks from attached D80 images and you are good to go.

If you have an IEEE printer, it would be really helpful if you could
start PC-DOS 3.30 and try to print something (or just "COPY CON LPT1").
I don't have a printer so I have no means to test my INT 17 is correct.

Regards,
Michau.

       Message was sent through the cbm-hackers mailing list