Eagle 7.7

Hallo allemaal,


I ran into an interesting thing last weekend. First I found an 
official cadsoft site where you can download the older Eagle 
versions: ftp://ftp.cadsoft.de/eagle/program/7.7/ 
Here I downloaded 7.7 for Windows-32 and installed it on my honey 
pot laptop. As expected when converting my SCH of the CBM 8032, it 
complained that I was not allowed to place ICs outside the given PCB 
border.

Why 7.7? Because I found this youtube movie:
https://www.youtube.com/watch?v=8_I8E9rRsFg

It gives you a link where to download the shown crack. And don't 
worry, there is indeed a virus in the crack. So I ran it on my 
special honey pot laptop and yes, I now was able to expand the PCB.

I just copied the Eagle.exe. Then I took a second computer, 
installed 7.7 here as well, renamed the original Eagle.exe and 
copied the hacked one to here. Again I scanned it for the x-ties 
time for virusses. Now the weird thing: both executables had the 
same size and only 24 bytes, not in a row, were different. Same 
size, just 24 different bytes, not something you expect from a virus 
IMHO.
But most important: again, after choosing Eagle Ultimate, I was able 
to create a board for the CBM 8032 again.

Disclaimer: the above is just some information about what I did last 
weekend and is not meant as encouragement to do illegal things or 
what ever is punishable by law. So if you corrupt your PC, blow up 
your mother-in-law or some other nasty things happen to you, then it 
is YOUR and YOUR fault only. So don't blam me.

Oh, don't worry, I restored a ghost and my honey pot laptop (I 
wished it was an HP instead of a Samsung) is ready for its next 
mission.


--
   
Kind regards / Met vriendelijke groet, Ruud Baltissen
www.Baltissen.org







       Message was sent through the cbm-hackers mailing list