It's probably be hard coded to fat12, so you'll need to change that. FAT itself isn't that complex, so if you're going to spend a long time reverse engineering it then starting from scratch is probably better. On 22/05/2018 14:41, Steve Gray wrote: > I the strength of the PLC TIB drive is that the firmware implements read/write of the FAT file system, making disk interchange much easier. I think it would be cool to adapt this to a CF, or other flash card format. The firmware is 6 to 8K so it'll be a challenge, but I think it would be worth it to disassemble the firmware (on my todo list). After that it might be fairly easy to adapt.Received on 2018-05-22 22:00:07
Archive generated by hypermail 2.2.0.