> On 2018-05-28, at 10:38, Michał Pleban <lists@michau.name> wrote: > >> They definitely are different and need to be programmed differently. There are no doubts about it. The doubts and problem are that programmers/software, which are supposed to support programming Atmel chips fail miserably here. Do I understand correctly that you also used programmers, which - according to the specs - should be able to program Atmel GALs but they didn't? > > Yes, that is correct. My programmer (EasyPro 90B) has separate choices > for Lattice and Atmel GALs, but even when I select Atmel, it cannot > program Atmel chips. OK, TNX. That makes the chances that my chips aren't actually faulty, somewhat higher. -- SD! - http://e4aws.silverdr.com/Received on 2018-05-28 16:01:29
Archive generated by hypermail 2.2.0.