On 6/4/2018 7:58 AM, André Fachat wrote: > Just for your info, I think I found the problem and spiro already > merged the fix. > > The problem seems to have been that there was not enough time between > DAV going high on the last data byte before an UNLISTEN, and the ATN > going low. The drive detected both in the same read and ignored the > valid byte as it also saw ATN going low. A small delay after sending > the last data byte seems to fix this problem just fine, the 2031 now > works fine and stable with the zoomfloppy with the updated opencbm > firmware. > > Cheers > André Knowing how hard it is to pry time away from other worthwhile things to add value to a project, please accept these thanks for the time you spent on this. JimReceived on 2018-06-04 19:01:55
Archive generated by hypermail 2.2.0.