On 08/01/2019 20:12, Mike Stein wrote: > If you really wanted to and didn't mind running the motors concurrently, it was a simple enough mod to one of the drives to let you do what you insist is the "better way", i.e. selecting drives with the DS jumpers instead of position. If the drives had DS jumpers then you just switch them both (i.e. if they were both jumpered DS1, then jumper both DS0). The drives would then look at the other select line, which would have the effect of swapping the drive letter. I seem to remember doing that. Later on when drives were cost reduced to remove all the jumpers, then it's slightly more complicated.Received on 2019-01-08 23:00:52
Archive generated by hypermail 2.2.0.