Re: hi res pic of 2001-8 power supply smoothing cap wiring

From: Ville Laustela <*ville.laustela_at_gmail.com*> Date: Thu, 7 Nov 2019 22:44:12 +0200 Message-Id: <F6FA4EF9-2871-4D59-91FB-D646470DEDBA_at_gmail.com> · ville.laustela_at_gmail.com

Here are two crops from my old photos, perhaps these are of some use:
https://postimg.cc/VSR5yLqp <https://postimg.cc/VSR5yLqp>
https://postimg.cc/GHW4Gf37 <https://postimg.cc/GHW4Gf37>

—
Ville


> Santo Nucifora <santo.nucifora_at_gmail.com> kirjoitti 7.11.2019 kello 22.37:
> 
> Hi Bill,
> 
> I happen to have one open. Hope this helps.
> 
> http://vintagecomputer.ca/wp-content/uploads/2019/11/Pet-2001-PS-wiring-01.jpg <http://vintagecomputer.ca/wp-content/uploads/2019/11/Pet-2001-PS-wiring-01.jpg>
> http://vintagecomputer.ca/wp-content/uploads/2019/11/Pet-2001-PS-wiring-02.jpg <http://vintagecomputer.ca/wp-content/uploads/2019/11/Pet-2001-PS-wiring-02.jpg>
> 
> Santo
> 
> On Thu, Nov 7, 2019 at 3:14 PM Bill Degnan <billdegnan_at_gmail.com <mailto:billdegnan_at_gmail.com>> wrote:
> I am hoping someone in this group has the URL or would not mind taking a hi-res pic of their 2001-8 power supply smoothing cap.  I'd like to see which wires are connected to the + and which to the - posts of the cap.  I understand what the voltages should be but I am trying to understand why whomever had the machine before me did what they did to change it..  4 of the 5 wires are connected to the negative post.
> 
> thanks
> 
> Bill Degnan