The earliest PETs had the active contacts on the bottom side. The tape drive had compatible contacts. On the machine that had this, I drilled small holes throught the contacts and soldered small wires top and bottom. On Thu, 19 Dec 2019, smf wrote: > On 19/12/2019 18:12, vossi wrote: >> I take a look at the tape connectors and cannot believe what I see: >> The contacts misses the via's !!! >> So the signals are only on the backside of the pcb! >> But all tape drives from Commodore have the contacts in the connector only >> on the upside!!! > > AFAIK they sold different tape drives for those. > > > > wlevak_at_sdf.lonestar.org SDF Public Access UNIX System - http://sdf.lonestar.orgReceived on 2020-05-29 23:58:07
Archive generated by hypermail 2.3.0.