> On 2021-09-02, at 00:31, Michiel Boland <michiel_at_boland.org> wrote: > > I took the liberty of making some small adjustments (mainly using a custom character set in 16x8 mode so we can clear the sceen by just writing zeroes everywhere) > > The following will do a full-frame cycle through all colors on PAL - only the bottom two lines will be black. I tested this on a real VC-20 with analog monitor (with h size and v size adjusted so the entire frame is visible) - also verified that the border color is never displayed, apart from on the bottom lines by changing the 8 in line 135 to 9. Thank you for taking time to check/do this. When I run it on `xvic` I still get one "column" worth of border colour on both left and right. Could you modify the line 135 poke36879,c*16+11 and recheck? That will make border cyan coloured, which won't escape the eye as black can. -- SD!Received on 2021-09-02 01:02:41
Archive generated by hypermail 2.3.0.