From: Nicolas Welte (no_spam_at_x1541.de)
Date: 2004-09-12 23:07:28
Marko Mäkelä wrote:
> Hi all,
>
> Someone contacted me, because he has a CBM 220 with a physically damaged
> circuit board. It is some sort of an interface between the main board
> (which looks like the universal PET board, as found inside the CBM 200
> a.k.a. 8032-SK) and the dual drive controller board. The damaged board
> has some 74xx chips and ribbon cable connectors. Does anyone have the
> schematic diagram? The ones at
> http://www.funet.fi/pub/cbm/schematics/computers/pet/8296/ do not seem
> applicable.
In my 8296D there is also an adaptor board, but IIRC it only adapts the
pinout of the 26pin connector of the mainboard to the 24pin connector on the
drive board. I can't remember there are any TTL chips on the board. If
needed, I can open the machine and make a foto of the board.
Nicolas
--
-> My Commodore hardware projects and the X1541 Shop at http://x1541.de <-
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.