From: Nicolas Welte (no_spam_at_x1541.de)
Date: 2005-01-21 08:55:59
Hi,
you can use your PET as an IEEE interface for the C64, by using the
following SIPOD cable and software:
http://members.tripod.com/~petlibrary/SPDCBL.HTM
Nicolas
Rich wrote:
> Hi,
>
> Can you use a CBM 8050 dual floppy drive with a C=64? Does it have a
> compatible edge connector for the cable?
>
> If this works, then I can hook a C=64 with its floppy to my dual
> floppy drive for the CBM 8032 and transfer files to floppy that way
>>from the PC via the C=64 and the Catweasel card.
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.