From: Nicolas Welte (no_spam_at_x1541.de)
Date: 2006-03-02 16:46:39
> --- Ursprüngliche Nachricht ---
> Von: Richard <legalize@xmission.com>
> An: cbm-hackers@ling.gu.se
> Betreff: Re: How good is "disksuck" by Highlander/FLT ?
> Datum: Thu, 02 Mar 2006 05:24:13 -0700
>
>
> In article <17414.43184.418547.621404@hal.cling.gu.se>,
> MagerValp <MagerValp@cling.gu.se> writes:
>
> > >>>>> "R" == Richard <legalize@xmission.com> writes:
> >
> > R> I know in my case the thing holding me up is that there is no
> > R> pre-made (or kit form) hardware available for purchase which puts
> > R> me in the position of having to try and make my own hardware.
> >
> > Really? [...]
>
> I should mention that my hardware setup is a CBM 8032 with an 8050
> double disk drive. So none of that C=64 stuff will work, unless its
> cassette port based and the C2N232 isn't being sold at the moment.
Actually cbmlink will also work fine with the PC64 cable and your setup
(yes, the PC64 cable is meant for the C64 userport, but cbmlink supports it
on the PET as well).
Oh, and you can get PC64 cables in the X1541 shop at sta.c64.org :)
Nicolas
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.