From: Marko Mäkelä (marko.makela_at_hut.fi)
Date: 2006-10-03 23:17:26
On Tue, Oct 03, 2006 at 08:06:53PM +0200, Nicolas Welte wrote:
> Only the shells and maybe datasette plugs have to be modified mechanically
> before they are sold to customers: The shell needs one hole for the IEC plug
> and the RESET jumper, and the datasette plugs needs to have the mounting
> holes removed, otherwise it won't fit into the 128DCR.
I guess it won't fit into the 128DCR with the case installed, will it?
At least it shouldn't fit into the side port of the CBM 200 a.k.a. 8032-SK,
unless your cases are lower than those used previously.
I just released c2nload version 1.0.5, which has successfully worked on
two different USB-to-serial adapters based on the PL-2303. It is
essentially identical with the pre-release from April 27.
http://www.iki.fi/~msmakela/8bit/c2n232/software/
I plan to update cbmlink and c2n within a few weeks, to make them
compatible with PL-2303 based adapters.
Marko
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.