From: William Levak (wlevak_at_sdf.lonestar.org)
Date: 2007-01-23 10:05:17
After thinking it over, I have decided that part of my previous answer is
wrong.
CS3 is A11, but it is implemented by being connected to either ground or
+5V. If you want to use a 4K EPROM you will have to disconnect the trace
for CS3 on the circuit board and jumper it to A11. Otherwise, use 2K
EPROMs and ignore CS3.
wlevak@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.