RE: Repairing a SFD-1001 (8250/LP, 8050, 4040, 3040, 2040)

From: Hoffmann-Vetter, Martin <martinhv_at_arcor.de>
Date: Thu, 11 Aug 2011 18:33:04 +0200
Message-ID: <007701cc5844$58dc1320$1b09a8c0@mhvnb10> 
Hello,

> Or you use a 139 (open collector) with a pullup resistor.

That's wrong, 139 isn't an open collector. It must be a 156! Or you use a
153, put the jumper with pullup resistors on the input and connect the
output to the chip select from the eprom.

Greetings

Martin


       Message was sent through the cbm-hackers mailing list
Received on 2011-08-11 17:00:21

Archive generated by hypermail 2.2.0.