On 11/03/2011 10:30 PM, Didier Derny wrote: > Hi, > > I checked my SX64 video cable. > > PIN 4 Composite Signal ouput connected to SCART PIN 20 > > PIN 3 Audio out connected to SCART > PIN 6 > > I guess the ground signal in the scart are connected to PIN 2 of the C64 > video > > Any advice to make a cable for the Plus4 ? The video output of C64 and Plus/4 are the same, you can use the same cable for both. > Should I use PIN 3 (1vpp) or 5 (0.5vpp) for audio Pin 3 ist Audio out, Pin 5 is audio _in_. You want to use pin 3 The type of plug you need is known as MAS80S. If you want to use S-Video instead of Composite, then you need to use pin 1 (luma) and 6 (chroma) on the Commodore side. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2011-11-04 17:00:19
Archive generated by hypermail 2.2.0.