Re: commodore plus 4 without sound...

Thanks all for all your advices,

I'll check the path between  the TED to the connector this week end

I should received a second TED too..

thanks

--
didier



Le 15/03/2012 17:34, Gerrit Heitsch a écrit :
> On 03/15/2012 12:46 PM, didier derny wrote:
>> Hi,
>>
>> it was the cable working with my sx64.
>> I checked the signal directly on the rca connector.
>
> You might want to check the signal directly at TED (Pin 33 is Sound 
> output) and if it's present there, check the simple amp that is 
> between TED and the DIN socket you plug your video cable into.
>
> The circuit is uses only one transistor (Q3) and can be found in the 
> schematics on the page with the modulator. There are a few 
> electrolytic capacitors in the signal path, one of them might be 
> dead/dry.
>
> On the PCB the circuit is located right next to the keyboard 
> connector. One side of R10 (1KOhm) is directly connected to TED's 
> sound output. Checking the signal there might be easier.
>
> Hope this helps
>
>  Gerrit
>
>
>
>       Message was sent through the cbm-hackers mailing list


       Message was sent through the cbm-hackers mailing list