On 2013-05-02, at 14:16, Michał Pleban wrote: > Hello! > > silverdr@wfmh.org.pl wrote: > >> We discussed it here not so long ago. The results are at: >> http://e4aws.silverdr.com/hard_projects/roms_replacement_wide/ > > Ah, right. But I can see it's for the old boards only, True. For the newer boards we also agreed on the schematic, which paradoxically has to be more complex. But since I like neither the 8580 ("fixed" volume change noise and different filters) nor 8565 (raster spikes and colours), I haven't yet found enough incentive to lay the PCB properly out. > and still needs > two wire taps :-) No, no wires there at all! Look closer ;-) > And it's for a 32kB EPROM, not a 512kB Flash, not to > mention the SD card ;-) Right. I had to do something in the meantime, while the ultimate replacement is not yet there.. ;-) But I understood that you wanted to have a "carrier board" for the CPLD/Flash/all I dreamed of ... -- SD! Message was sent through the cbm-hackers mailing listReceived on 2013-05-02 13:02:00
Archive generated by hypermail 2.2.0.