Re: A4k PWR Connectors

From: silverdr_at_wfmh.org.pl Date: Thu, 1 May 2014 00:42:12 +0200 Message-ID: <etPan.53617c44.643c9869.d164@szaman.lan>

------------------------------------------------------
From: Christian Dirks toast_r@idealine.info
Reply: cbm-hackers@musoftware.de cbm-hackers@musoftware.de
Date: 2014-04-30 at 23:43:08
To: cbm-hackers@musoftware.de cbm-hackers@musoftware.de
Subject:  Re: A4k PWR Connectors

> Am 30.04.2014 22:58, schrieb silverdr@wfmh.org.pl:
> > In A4000 and a couple of other machines, CBM used a kind of 6-pole connector for power  
> from PSU to the mainboard. Does anyone know the name/source of those connectors? Plugs  
> especially..
> >
> I dont know the A4000, but according to the following picture:
> http://www.planetmulti.de/v2/pic/A4000_Motherboard_big.jpg
> it uses the same connector as the CBM II series.

And some other machines/boards. Like some PCs by CBM. Yes, they used it not only in A4k.

> If so, the plug housing is AMP 0-0350715-4.
> The fitting contact pins are AMP 0-0926898-3 (for 0.5 ... 2.1 mm² wire)

Thanks, Christian - looks like this is indeed the one. Should make searching for source much easier.
--  
SD!

       Message was sent through the cbm-hackers mailing list