Nice! What's the expected price? And will it run Windoze 10 ¿ ;) .-.-. On 4/09/2015 1:11 PM, Jim Brain wrote: > On 7/11/2015 6:13 AM, didier derny wrote: >> I was thinking to something simple, a small flash / eprom with a menu >> to load a cartridge image to a ram >> mapped at the cartridge location and write protected >> >> the vic20 is quite far for me :) I've not really use one since 1985... >> (except to repair and play a little bit with the board I just repaired >> >> so I'll have to check that I'm not totally wrong :) about this machine > If you are still interested in this, I am putting the finishing > touches on a small 3 IC design I have working on the bench: > > 8MB FLASH > 1MB SRAM > CPLD > It supports a bank register for each of 5 memory banks: > > RAM1/2/3 > BANK1 > BANK2 > BANK3 > BANK5 > > Each bank can be in any 8kB spot of RAM or ROM, and either RAM, ROM, > RO RAM, or nothing can appear in each VIC-20 memory bank. Obviously, > someone needs to write a menu and programmer app... > > Jim > > > Message was sent through the cbm-hackers mailing list Message was sent through the cbm-hackers mailing listReceived on 2015-09-04 05:00:07
Archive generated by hypermail 2.2.0.