From: Baltissen, GJPAA (Ruud) (ruud.baltissen_at_abp.nl)
Date: 2003-09-26 14:50:25
Hallo Mikael,
> What pins of the internal connector should go to what pin of the 128D's
external connector?
That is a very easy one. The mobo of a 128 is exactly the same as the one of
a 128D. the only differences are the used connectors. Just solder a 25 pins
D-connector right on the original connector of the 128-keyboard. A nicer way
is to desolder the counterpart of the 128 mobo and solder the D-conector to
it first. In this way the 128 keyboard can be used for both systems.
--
___
/ __|__
/ / |_/ Groetjes, Ruud
\ \__|_\
\___| http://Ruud.C64.org
=====DISCLAIMER=================================================================
De informatie in dit e-mailbericht is vertrouwelijk en uitsluitend bestemd voor de geadresseerde. Wanneer u dit bericht per abuis ontvangt, verzoeken wij u contact op te nemen met de afzender per kerende e-mail. Verder verzoeken wij u in dat geval dit e-mailbericht te vernietigen en de inhoud ervan aan niemand openbaar te maken. Wij aanvaarden geen aansprakelijkheid voor onjuiste, onvolledige dan wel ontijdige overbrenging van de inhoud van een verzonden e-mailbericht, noch voor daarbij overgebrachte virussen.
The information contained in this e-mail is confidential and may be privileged. It may be read, copied and used only by the intended recipient. If you have received it in error, please contact the sender immediately by return e-mail; please delete in this case the e-mail and do not disclose its contents to any person. We don't accept liability for any errors, omissions, delays of receipt or viruses in the contents of this message which arise as a result of e-mail transmission.
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.