On 11/26/2014 11:04 PM, Rob Clarke wrote: > > On 26/11/2014 22:47, Gerrit Heitsch wrote: >> On 11/26/2014 10:38 PM, didier derny wrote: >>> Hi, you are right, the software was not correctly releasing the keys at >>> keyUP >>> >>> And the mapping is bad, I tried to find the correct mapping in Vice >>> source >>> as >>> >>> Suggested by Andre, but it's huge and I've not found anything >> >> Keyboard matrix? >> >> You have seen this page? >> >> http://www.devili.iki.fi/Computers/Commodore/Plus4/Service_Manual/page_07.html >> >> >> This is for the Plus/4, but together with the schematics for the C116, >> you should be able to get the proper pinout. >> > No need. The matrix on the 116 and plus4 is identical, as is the pin > assignment of the connector. A plus/4 keyboard will work on a 116 and > vice-versa. Well, the keyboard matrix has to be the same on all 264 systems since they all use the same ROMs. I just wasn't sure whether the keyboard connectors are the same. The one in the C16 will obviously be different, but good to know that C116 and Plus/4 use the same connector and the same pinout on it. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2014-11-26 23:00:42
Archive generated by hypermail 2.2.0.