RE: commodore c116 starting in the monitor instead of the basic

That's great, thanks

I'll correct the mapping between usb -> c116 tomorrow
And I'll check the connections to the keyboard connector

Btw the connector was hard to make. I used a piece of PCB  2.54  + pins 
And I thinned the pins with a diamond file
Now it fit in the connector right on the contact without distorting it


Later I'll add a Bluetooth module to avoid making any hole in the c116 box
The original keyboard will be left for "decoration"


--
Didier



-----Message d'origine-----
De : owner-cbm-hackers@musoftware.de
[mailto:owner-cbm-hackers@musoftware.de] De la part de Gerrit Heitsch
Envoyé : mercredi 26 novembre 2014 22:48
À : cbm-hackers@musoftware.de
Objet : Re: commodore c116 starting in the monitor instead of the basic

On 11/26/2014 10:38 PM, didier derny wrote:
> Hi, you are right, the software was not correctly releasing the keys 
> at keyUP
>
> And the mapping is bad, I tried to find the correct mapping in Vice 
> source as
>
> Suggested by Andre, but it's huge and I've not found anything

Keyboard matrix?

You have seen this page?

http://www.devili.iki.fi/Computers/Commodore/Plus4/Service_Manual/page_07.ht
ml

This is for the Plus/4, but together with the schematics for the C116, you
should be able to get the proper pinout.


  Gerrit



       Message was sent through the cbm-hackers mailing list


       Message was sent through the cbm-hackers mailing list