Just an additional note: The latched AEC is only used for the R/W# signal... The address and data but signals are using the unmodified AEC. But that's it. Finally. No other "magic". /Frank > what else is gate_in doing then? > Another doubt I have is: does R/W go hi-z as soon as AEC goes low or > does it go hi-z only at the next gate_in high transition? > (That would be a really strange latch enable acting on the output enable too...) > > Thanks again > Frank > >Received on 2020-08-30 21:00:57
Archive generated by hypermail 2.3.0.